Shop Electrodes by Application
Our products can be used in a wide range of applications. Our electrodes are manufactured accurately with first-class engineering and are ideal for quality results in various applications.
Environment
Showing 1–16 of 19 results
-
P14 Epoxy Body Combination pH Electrode
Low maintenance probe that does not require refilling. Porous Teflon junction designed to be easy to clean and resist against…Read moreBody Type: Epoxy
Temperature Range: 0 - 80°C
pH Range: 0 - 14
Junction Type: Porous Teflon
-
R1 AgCl Glass Reference Electrode
AgCl Glass reference electrode for use with pH, ORP (Redox) and Ion Selective Electrodes. Built within a 12mm diameter glass…Read moreBody Type: Glass
Temperature Range: 0 - 90°C
Junction Type: Frit Ceramic
Reference Type: AgCl
-
K25/G Glass Bodied K=0.8 Laboratory Conductivity Electrode
Designed for general purpose water-based conductivity measurements. Particularly good in dirty high conductivity samples and is easily cleaned. Compatible with…Read moreBody Type: Glass
Temperature Range: 0 - 70°C
Range: 0 - 1000 mS/cm
Plate Material: 99.99% Pure Platinum
-
Fluoride 3221 Combination Ion Selective Electrode
Rugged solid-state Fluoride sensor suitable for laboratory and field work. Low maintenance probe that does not require refilling. No need…Read moreBody Type: Epoxy
Temperature Range: 5 - 50°C
pH Range: 4 - 8
Limits: 1,900 - 0.02
-
OI11 Combination PPS ORP Industrial Electrode
Glass filled PPS combination electrode for super rugged dip type ORP measurements. This probe features 3/4" NPT thread size at…Read moreBody Type: Glass Filled PPS
Temperature Range: 0 - 100°C
Junction Type: Porous Teflon
Range: ± 2000mV
-
K22 Epoxy Bodied K=10 Laboratory Conductivity Electrode
Epoxy bodied conductivity electrode with carbon plates, K=10 cell constant and optional ATC. When ordering conductivity cells please specify make…Read moreBody Type: Epoxy
Temperature Range: 0 - 100°C
Range: 0 - 5s/cm
Plate Material: Carbon
-
K25 General Purpose K=0.55 Laboratory Conductivity Electrode
Epoxy bodied, 4-pole conductivity electrode with carbon plates, K=0.55 cell constant and optional ATC. When ordering conductivity cells please specify…Read moreBody Type: Epoxy
Temperature Range: 0 - 70°C
Range: 0 - 1S/cm
Plate Material: Carbon
-
P21-NS14/15-S7 pH Difficult Samples Titrator Electrode
Refillable single junction pH titrator electrode. New improved formulation of non-aqueous fill solution but can be used with traditional LiCl…Read moreBody Type: Glass
Temperature Range: 0 - 80°C
pH Range: 0 - 14
Junction Type: Sleeve
-
P11 Drinking Water pH Electrode
pH of water particularly cold low conductivity waters for low ionic strength. Long life double junction reference cell with salt…Read moreBody Type: Glass
Temperature Range: 0 - 50°C
pH Range: 0 - 11
-
P11 Glass Combination pH Electrode
pH electrode perfect for pH measurements in the laboratory and where higher accuracy measurements are required of samples.Read moreBody Type: Glass
Temperature Range: 0 - 80°C
pH Range: 0 - 14
Junction Type: Annular Ceramic
-
P11 Protected Bulb pH Electrode
Robust body exterior protected bulb pH electrode for tough or dirty applications where epoxy is not suitable. Porous Teflon junction…Read moreBody Type: Glass
Temperature Range: 0 - 80°C
pH Range: 0 - 14
Junction Type: Porous Teflon
-
P11 Rod Glass Combination pH Electrode
pH electrode with rod shaped memebrane for extra strength and durability. Versitile refillable pH probe, featuring and Annular Ceramic junction.…Read moreBody Type: Glass
Temperature Range: 0 - 80°C
pH Range: 0 - 14
Junction Type: Annular Ceramic
-
P15 Low Conductivity Water Combination pH Electrode
Specially developed for samples with low conductivity i.e., ‘cold, clean water’. Glass body that is easy to clean and maintain.…Read moreBody Type: Epoxy
Temperature Range: 0 - 50°C
pH Range: 0 - 11
Junction type: Annular Ceramic
-
P18 Spear Combination pH Electrode
Spearpoint membranes provide strength perfect for penetration of samples such as semi-solids. Versatile refillable probe allowing an extended life span.…Read moreBody Type: Glass
Temperature Range: 0 - 80°C
pH Range: 0 - 14
Junction type: Annular Ceramic
-
P21 Sleeve Junction Colloids/Low Conductivity pH Electrode
pH sensor designed for non-aqueous samples. Renewable junction design prevents junction clogging. Pseudo double junction where the reference is protected…Read moreBody Type: Glass
Temperature Range: 0 - 100°C
pH Range: 0 - 14
Junction Type: Glass Sleeve
can’t find what you need?
Bespoke Electrode Solutions
Sentek has been manufacturing electrodes since 1991 from our manufacturing facility located in Essex, UK. Using the experience and industry know-how built up over the last 3 decades, we able to offer custom pH, reference, ISE and conductivity sensors built to suit your requirements.
All our electrodes manufactured with top-notch accuracy and precise engineering to ensure the very best products for our valued clients, with the added flexibility of a minimum order of just one electrode.
The quality of our manufacturing has made us the leading manufacturer of electrochemical sensors in the UK, with all of our products manufactured in accordance with the highest industry standards.