• Non-refillable, gel-filled design for long life and minimal maintenance
• 6x200mm glass body, perfect for reactor vessels
• Integrated Pt1000 temperature sensor for accurate, temperature-compensated measurements
• VP6 connector for easy connection to compatible transmitters and analysers
• PG13.5 thread for reliable inline installation
• Ideal for inline pH measurement in chemical processing applications

The post P11 Gel-Filled pH Electrode with Integrated Temperature Sensor appeared first on Sentek Limited.

• Rugged solid-state Fluoride mono sensor suitable for laboratory and field work.
• Ideal for applications where high accuracy is required, particularly where ion levels are low (<1ppm).
• Requires a separate Reference electrode, see Specification for compatible reference type.
• Low maintenance probe that does not require refilling.
• No need for storage solutions. This electrode is stored dry for easy and convenient use.
• Easy-to-use electrode with long lifetime.
• Cable length to be specified when ordering. Maximum length is 10 metres. Standard products are fitted with 1 metre of cable terminated with a BNC connector.

The post Fluoride 333 Mono Ion Selective Electrode appeared first on Sentek Limited.

• Rugged solid-state Fluoride sensor suitable for laboratory and field work.
• Low maintenance probe that does not require refilling.
• No need for storage solutions. This electrode is stored dry for easy and convenient use.
• Easy-to-use electrode with long lifetime.
• Can be used with any conventional laboratory or hand held pH meter with a millivolt mode.
• Cable length to be specified before ordering. Maximum length is 10 metres. Standard products are fitted with 1 metre of cable terminated with a BNC connector.

The post Fluoride 3221 Combination Ion Selective Electrode appeared first on Sentek Limited.

• Spear pH electrode specially designed spear tip and narrow lower shaft for testing semi-solid samples.
• Less leakage and lower flow rate in the sample with a frit ceramic junction type.
• Specialist pH glass body that is easy to clean and maintain.
• Versatile refillable probe allowing an extended life span.
• Supplied with a fixed 1 meter cable and BNC connector.

The post P19 Small Diameter Spear Combination pH Electrode appeared first on Sentek Limited.

• Advanced laboratory pH electrode, able to withstand higher pressure or temperature than standard laboratory electrodes.
• Designed with pressure compensation and constructed from specialist membrane glass for high-temperature measurements.
• Double junction electrode for an increased lifespan and protection against aggressive samples.
• Low maintenance probe that does not require refilling.
• Versatile in a range of applications.
• Supplied with a fixed 1 meter cable and BNC connector.

The post PI10 Laboratory pH Electrode appeared first on Sentek Limited.

• Designed with a frit ceramic junction to suit multiple applications, less leakage and lower flow rate in the sample.
• Extended narrow body length for precision analysis of semi-micro and low volume samples, such as an NMR tube.
• Versatile refillable probe allowing extended life span.
• Extra-long reach available with 180mm total shaft length.

The post P13 Semi Micro Combination pH Electrode appeared first on Sentek Limited.

• Specially developed for samples with low conductivity i.e., ‘cold, clean water’.
• Glass body that is easy to clean and maintain.
• Built with an annular ceramic junction type to suit a vast range of applications.
• Designed with a bulb shape, and refined temperature and pH range for super-accurate readings.

The post P15 Low Conductivity Water Combination pH Electrode appeared first on Sentek Limited.

• Extended body length perfect for test tubes and applications that require a long reach.
• Designed with a frit ceramic junction type to suit multiple applications, ensure less leakage and lower flow rate in the sample.
• Double junction where the reference is protected in a KCl/AgCl gel filled coil.
• Glass body that is easy to clean and maintain.
• Versatile refillable probe allowing different solutions for different applications and an extended life span.
• Designed for use with tris buffers in bioscience applications.
• No silver in the lower chamber to avoid precipitate blocking the junction.

The post P16 Tris Buffers Combination pH Electrode appeared first on Sentek Limited.

• Porous Teflon junction designed to be easy to clean and resist against blockages.
• Robust epoxy body designed for tough applications.
• Versatile refillable probe allowing an extended life span.
• A flat surface pH glass membrane is perfect for surface measurements or samples that may damage glass membranes.
• Resistant to breakage due to very little glass exposed.

The post P17 Flat Head Combination pH Electrode appeared first on Sentek Limited.

• Spearpoint membranes provide strength perfect for penetration of samples such as semi-solids.
• Versatile refillable probe allowing an extended life span.
• Designed with an annular ceramic junction type to suit a vast range of applications.
• The large surface area of annular ceramic provides a fast response in more viscous samples.

The post P18 Spear Combination pH Electrode appeared first on Sentek Limited.