The unique sealed membrane allows ease of use of the DO2 sensor without the need for spare membranes and refilling solutions whilst still guaranteeing accurate results and long life.

The post Galvanic Dissolved Oxygen Electrode appeared first on Sentek Limited.

Polarographic dissolved oxygen electrode, designed for laboratory measurements and has a standard 12mm body diameter, with in air-saturated water (20.9% Oxygen), the probe has an output of 600nA. The residual output in zero oxygen solution is less than 1% of the output in saturated water. One or two ATC sensors (Thermistor or PT100/1000) may be fitted to customers specific requirements. Replacing the Teflon membrane is quick and easy. Simply unscrew the old assembly, load the new one with fill solution and screw on to the electrode. The electrode is supplied complete with 2 membrane assemblies and a 50ml bottle of filling solution.

A 50ml bottle of Zero Oxygen solution is available for calibration purposes.

When ordering replacement electrodes, please specify make and type of instrument for which the electrode is required, and the following details:

• A = Length of cable required in metres
• B = ATC element (Th=Thermistor or Pt=Platinum Resistance Element)
• C = Resistance value of ATC
• D = Connector Type

Example: 601/2m/Th10K/5Pin Din – which would be 601 with 2m cable, 10K Thermistor ATC and 5 Pin Din Connector.

The post Polarographic Dissolved Oxygen Electrode appeared first on Sentek Limited.