• Non-refillable, gel-filled design for long life and minimal maintenance
• 6x200mm glass body, perfect for reactor vessels
• Integrated Pt1000 temperature sensor for accurate, temperature-compensated measurements
• VP6 connector for easy connection to compatible transmitters and analysers
• PG13.5 thread for reliable inline installation
• Ideal for inline pH measurement in chemical processing applications

The post P11 Gel-Filled pH Electrode with Integrated Temperature Sensor appeared first on Sentek Limited.

• Epoxy bodied electrode, featuring Ag/AgCl, Gel filled, Double Junction reference with Additional Salt Rings for a longer life electrode.
• Designed with a Porous Teflon double junction which provides a longer electrode life in difficult samples where probe blockages have been a problem.
• Sensor is supplied with an S8 PG13.5 thread connector for convenience and versatility.

The post O14/DJ/TEF/S8 Industrial Electrode appeared first on Sentek Limited.

• Epoxy bodied electrode, featuring Ag/AgCl, Gel filled, Double Junction reference with Additional Salt Rings for a longer life electrode.
• Designed with a Porous Teflon double junction which allows for use in difficult sticky samples where blockage of a liquid junction is common.
• Sensor is supplied with 1 metre cable and BNC connector.

The post O14/DJ/TEF/1M/BNC Epoxy Combination ORP Electrode appeared first on Sentek Limited.

• ORP/ Redox combination electrode featuring an annual ceramic junction and 1mm x 8mm Platinum Rod sensing element.
• Glass bodied sensor which is easy to clean and can withstand high temperature applications.
• Sensor is supplied with an S8 PG13.5 thread connector for convenience, versatility and durability.

The post O1/S8 Platinum ORP Glass Combination Electrode appeared first on Sentek Limited.

• S7 Semi Micro Combination pH Electrode designed with a frit ceramic junction to suit multiple applications, less leakage and lower flow rate in the sample.
• Extended narrow body length for precision analysis of semi-micro and low volume samples.
• Versatile refillable probe allowing different solutions for different applications and extended life span.
• S7 cap delivers convenience and compatibility with almost any meter.
• Extra-long reach available with 180mm shaft length (P13/4/180/NMR.)

The post P13/S7 Semi Micro Combination pH Electrode appeared first on Sentek Limited.

• Designed for general purpose water-based conductivity measurements.
• Particularly good in dirty high conductivity samples and is easily cleaned.
• Compatible with Thermo Orion, Mettler Toledo, Eutech and WTW instruments. Please specify make and model when enquiring.
• Perfect for instrument manufacturers to offer as accessories for meters.

The post K25/G Glass Bodied K=0.8 Laboratory Conductivity Electrode appeared first on Sentek Limited.

• pH electrode with rod shaped membrane for extra strength and durability.
• Versatile refillable pH probe, featuring an Annular Ceramic junction.
• Supplied with 1 meter cable and BNC connector.

The post P11 Rod Glass Combination pH Electrode appeared first on Sentek Limited.

• Rugged solid-state Fluoride sensor suitable for laboratory and field work.
• Low maintenance probe that does not require refilling.
• No need for storage solutions. This electrode is stored dry for easy and convenient use.
• Easy-to-use electrode with long lifetime.
• Can be used with any conventional laboratory or hand held pH meter with a millivolt mode.
• Cable length to be specified before ordering. Maximum length is 10 metres. Standard products are fitted with 1 metre of cable terminated with a BNC connector.

The post Fluoride 3221 Combination Ion Selective Electrode appeared first on Sentek Limited.

• Sterilisation-ready design ensures the sensor is engineered for steam sterilisation and autoclavable applications, making it ideal for sterile biotech environments.
• High-temperature and pressure tolerance allows it to operate effectively in temperatures up to 130°C and pressures up to 10 BAR, ensuring reliability in demanding conditions.
• Incorporates high-quality PT100 thermistors to deliver fast response times and accurate temperature readings.
• Standardised connectivity with a PG13.5 thread and S8 connector ensures compatibility with a wide range of monitoring systems and instruments. Cables are sold separately.
• Suitable for use in both small bioreactors and large-scale fermentation processes, offering flexibility across different scales of operation.
• Sensors are available in various lengths, from 120 mm to 480 mm, providing options to suit different installation requirements.

The post Sterprobe – Temperature Sensor, Glass, Euro-Standard PG13.5 Pt100 appeared first on Sentek Limited.

• Sterilisation-ready design ensures the probe is engineered for steam sterilisable and autoclavable applications, making it ideal for sterile biotech environments.
• Robust construction features a durable glass body with a spherical pH bulb, minimizing the risk of breakage during use.
• Wide measurement range capable of measuring pH levels from 0 to 14, suitable for various applications.
• High-temperature and pressure tolerance, it operates effectively in temperatures up to 130°c and pressures up to 10 bar, ensuring reliability in demanding conditions.
• An advanced reference system incorporating a special reference design and new pH glass formulation to minimise drift, provide fast response, and deliver accurate pH readings.
• Standardised connectivity with a PG13.5 thread and S8 connector, ensuring compatibility with a wide range of pH instruments and systems. Cables sold separately.
• Suitable for use in both small bioreactors and large-scale fermentation processes, offering flexibility across different scales of operation.
• Sensors are available in various lengths, from 120 mm to 480 mm, providing options to suit different installation requirements.

The post Sterprobe – Gel Filled pH Electrode, Euro-Standard PG13.5 appeared first on Sentek Limited.