• S7 Semi Micro Combination pH Electrode designed with a frit ceramic junction to suit multiple applications, less leakage and lower flow rate in the sample.
• Extended narrow body length for precision analysis of semi-micro and low volume samples.
• Versatile refillable probe allowing different solutions for different applications and extended life span.
• S7 cap delivers convenience and compatibility with almost any meter.
• Extra-long reach available with 180mm shaft length (P13/4/180/NMR.)

The post P13/S7 Semi Micro Combination pH Electrode appeared first on Sentek Limited.

• pH electrode with rod shaped membrane for extra strength and durability.
• Versatile refillable pH probe, featuring an Annular Ceramic junction.
• Supplied with 1 meter cable and BNC connector.

The post P11 Rod Glass Combination pH Electrode appeared first on Sentek Limited.

• pH sensor designed for non-aqueous samples. Renewable junction design prevents junction clogging.
• Pseudo double junction where the reference is protected in a KCl/AgCl gel filled coil allowing an array of non-aqueous fill solution to be used within the same sensor.
• Allows aqueous and non-aqueous samples to be measured with same sensor, simply by changing the fill solution.
• New improved formulation of non-aqueous fill solution but can be used with traditional LiCl based solutions as well.

The post P21 Sleeve Junction Colloids/Low Conductivity pH Electrode appeared first on Sentek Limited.

• Designed with a frit ceramic junction to suit multiple applications, less leakage and lower flow rate in the sample.
• Extended narrow body length for precision analysis of semi-micro and low volume samples, such as an NMR tube.
• Versatile refillable probe allowing extended life span.
• Extra-long reach available with 180mm total shaft length.

The post P13 Semi Micro Combination pH Electrode appeared first on Sentek Limited.

• Porous Teflon junction designed to be easy to clean and resist against blockages.
• Robust epoxy body designed for tough applications.
• Versatile refillable probe allowing an extended life span.
• A flat surface pH glass membrane is perfect for surface measurements or samples that may damage glass membranes.
• Resistant to breakage due to very little glass exposed.

The post P17 Flat Head Combination pH Electrode appeared first on Sentek Limited.

• pH electrode perfect for pH measurements in the laboratory and where higher accuracy measurements are required of samples.

The post P11 Glass Combination pH Electrode appeared first on Sentek Limited.

• Less leakage and lower flow rate in the sample with a frit ceramic junction type.
• Extended body length perfect for flasks and applications that require a long reach.
• Refillable probe with glass body that is easy to clean and maintain.
• A small lower diameter (6mm) allows the measurement of low volume samples.

The post P12 Long Reach Combination pH Electrode appeared first on Sentek Limited.

• Robust body exterior protected bulb pH electrode for tough or dirty applications where epoxy is not suitable.
• Porous Teflon junction for resistance against blockages.
• Chemically neutral and able to withstand high temperatures for testing a range of samples.
• Bulb shape probe for highly accurate results.
• Versatile refillable probe allowing testing of different solutions for different applications and an extended life span.

The post P11 Protected Bulb pH Electrode appeared first on Sentek Limited.