• Epoxy bodied electrode, featuring Ag/AgCl, Gel filled, Double Junction reference with Additional Salt Rings for a longer life electrode.
• Designed with a Porous Teflon double junction which provides a longer electrode life in difficult samples where probe blockages have been a problem.
• Sensor is supplied with an S8 PG13.5 thread connector for convenience and versatility.

The post O14/DJ/TEF/S8 Industrial Electrode appeared first on Sentek Limited.

• Epoxy bodied electrode, featuring Ag/AgCl, Gel filled, Double Junction reference with Additional Salt Rings for a longer life electrode.
• Designed with a Porous Teflon double junction which allows for use in difficult sticky samples where blockage of a liquid junction is common.
• Sensor is supplied with 1 metre cable and BNC connector.

The post O14/DJ/TEF/1M/BNC Epoxy Combination ORP Electrode appeared first on Sentek Limited.

When ordering conductivity cells please specify make and model of conductivity meter.

The post 18MPRB-USP Measurement of DI Water Laboratory Conductivity Electrode appeared first on Sentek Limited.

When ordering conductivity cells please specify make and model of conductivity meter.

The post K40 Pure Water Laboratory Conductivity Electrode appeared first on Sentek Limited.

• pH sensor designed for non-aqueous samples.
• Pseudo double junction where the reference is protected in a KCl/AgCl gel filled coil allowing an array of non-aqueous fill solution to be used within the same sensor.
• Allows aqueous and non-aqueous samples to be measured with same sensor, simply by changing the fill solution.
• New improved formulation of non-aqueous fill solution but can be used with traditional LiCl based solutions as well.

The post P11/DJ/NaF Non-Aqueous Samples appeared first on Sentek Limited.