• Epoxy bodied electrode, featuring Ag/AgCl, Gel filled, Double Junction reference with Additional Salt Rings for a longer life electrode.
• Designed with a Porous Teflon double junction which provides a longer electrode life in difficult samples where probe blockages have been a problem.
• Sensor is supplied with an S8 PG13.5 thread connector for convenience and versatility.

The post O14/DJ/TEF/S8 Industrial Electrode appeared first on Sentek Limited.

• Designed for general purpose water-based conductivity measurements.
• Particularly good in dirty high conductivity samples and is easily cleaned.
• Compatible with Thermo Orion, Mettler Toledo, Eutech and WTW instruments. Please specify make and model when enquiring.
• Perfect for instrument manufacturers to offer as accessories for meters.

The post K25/G Glass Bodied K=0.8 Laboratory Conductivity Electrode appeared first on Sentek Limited.

• Rugged solid-state Nitrate mono sensor suitable for laboratory and field work.
• Ideal for applications where high accuracy is required, particularly where ion levels are low (<1ppm).
• Requires a separate Reference electrode, see Specification for compatible reference type.
• Low maintenance probe that does not require refilling.
• No need for storage solutions. This electrode is stored dry for easy and convenient use.
• Easy-to-use electrode with long lifetime.
• Cable length to be specified when ordering. Maximum length is 10 metres. Standard products are fitted with 1 metre of cable terminated with a BNC connector.

The post Nitrate 311 Mono Ion Selective Electrode appeared first on Sentek Limited.

• Rugged solid-state Nitrate sensor suitable for laboratory and field work.
• Low maintenance probe that does not require refilling.
• No need for storage solutions. This electrode is stored dry for easy and convenient use.
• Easy-to-use electrode with long lifetime.
• Can be used with any conventional laboratory or hand held pH meter with a millivolt mode.
• Cable length to be specified before ordering. Maximum length is 10 metres. Standard products are fitted with 1 metre of cable terminated with a BNC connector.

The post Nitrate 3021 Combination Ion Selective Electrode appeared first on Sentek Limited.

• Rugged solid-state Ammonia sensor suitable for laboratory and field work.
• Low maintenance probe that does not require refilling.
• No need for storage solutions. This electrode is stored dry for easy and convenient use.
• Easy-to-use electrode with long lifetime.
• Can be used with any conventional laboratory or hand held pH meter with a millivolt mode.
• Supplied with 1 meter fixed cable and BNC connector. Image shows S8 version.

The post Ammonia 321 Combination Ion Selective Electrode appeared first on Sentek Limited.

• pH electrode with rod shaped membrane for extra strength and durability.
• Versatile refillable pH probe, featuring an Annular Ceramic junction.
• Supplied with 1 meter cable and BNC connector.

The post P11 Rod Glass Combination pH Electrode appeared first on Sentek Limited.

• Ready to use ion standard calibration solution for accurate readings.
• No weighing or diluting required for precise ion calibration.
• 500ml bottle.
• Available in the following:
  • 553-11 Chloride 1000ppm
  • 553-13 Bromide 1000ppm
  • 553-15 Iodide 1000pppm
  • 553-17 Copper 1000ppm
  • 553-19 Lead 1000ppm
  • 553-21 Silver 1000ppm
  • 553-23 Cadmium 1000ppm
  • 553-25 Calcium 1000ppm
  • 553-27 Nitrate 1000ppm
  • 553-31 Water Hardness 1000ppm
  • 553-33 Potassium 1000ppm
  • 553-37 Ammonia 1000ppm
  • 553-45 Thiocyanate 1000ppm
  • 553-47 Fluoride 1000ppm
  • 553-49 Ammonium 1000ppm
  • 553-56 Mercury 1000ppm
  • 553-57 Magnesium 1000ppm

The post Standard Calibration Solution for ISEs appeared first on Sentek Limited.

• Glass filled PPS combination electrode for super rugged dip type ORP measurements.
• This probe features 3/4″ NPT thread size at both ends to enable thread mounting in a pipe for dip measurements, or to screw into a ‘T’ for flow line measurements.
• Porous Teflon junction sensor, with Platinum Band sensing element.
• Temperature range of 0 – 100°C and a measuring range of ± 2000mV.
• Sensor is supplied with a 5 metre fixed cable and BNC connector.

The post OI11 Combination PPS ORP Industrial Electrode appeared first on Sentek Limited.

Epoxy bodied, 4-pole conductivity electrode with carbon plates, K=0.55 cell constant and optional ATC.

When ordering conductivity cells please specify make and model of conductivity meter.

The post K25 General Purpose K=0.55 Laboratory Conductivity Electrode appeared first on Sentek Limited.

• AgCl Glass reference electrode for use with pH, ORP (Redox) and Ion Selective Electrodes.
• Built within a 12mm diameter glass body and with a cermaic frit junction.
• Refillable electrode with Ag/AgCl system.
• Supplied with a 1 meter cable and 2mm pin plug.

The post R1 AgCl Glass Reference Electrode appeared first on Sentek Limited.