SENTEK LIMITED

Manufacturer’s of Electrochemical Sensors

sentekuk@btconnect.com                 +44 (0) 1376 340 456

Features and Procedures

 

The EconoRUSH™ Sensor Holder is designed to allow replacement of 12mm diameter x 120mm long electrodes without interrupting the process flow.

 

It utilises the 25mm Port system, a unique gimbal mounting, o-rings with low compression set, and the majority or parts are constructed of stainless steel (316L)

 

Gimbal Nut

Gimbal

Installation and Use

 

Mounting: The EconoRUSH™ Sensor Holder was designed to be used with the 25mm (44mm long) port system that is used throughout the Bio Pharmaceutical Industry. For other industries there are a series of adapters.

 

One adapts the 25mm port to 1 ¼" NPT. Other sizes can be 1", 1 ½", and 2" NPT or additional process type threads. Another adapter is for interfacing to a 1 ½" Sanitary Flange. Other sizes available are 2" and 2 ½". Other adapters can be realised as needed with some limits on size.

Mounting the Electrode

 

To mount the Electrode into the holder, the existing O-ring and washer need to be removed from the electrode.

 

The Gimbal is then screwed onto the electrode and then fitted into the holder.

 

The Gimbal Nut is then screwed on top to hold the electrode in place.